scholarly journals Nonlinear Motion Control of Mobile Robot Dynamic Model

10.5772/5997 ◽  
2008 ◽  
Author(s):  
Jasmin Velagic ◽  
Bakir Lacevic ◽  
Nedim Osmic
Keyword(s):  
Mobile Robot ◽  
Dynamic Model ◽  
Motion Control ◽  
Nonlinear Motion

Ultrasonic sensor system for the uses in intelligent motion control system of a mobile robots group

2010 ◽  
Vol 7 ◽  
pp. 109-117
Author(s):  
O.V. Darintsev ◽  
A.B. Migranov ◽  
B.S. Yudintsev
Keyword(s):  
Control System ◽  
Mobile Robot ◽  
Mobile Robots ◽  
Motion Control ◽  
High Speed ◽  
Ultrasonic Sensor ◽  
Sensor System ◽  
Motion Control System ◽  
Speed Sensor ◽  
Working Space

The article deals with the development of a high-speed sensor system for a mobile robot, used in conjunction with an intelligent method of planning trajectories in conditions of high dynamism of the working space.

scholarly journals Motion Planning and Control of an Omnidirectional Mobile Robot in Dynamic Environments

Robotics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 48
Author(s):  
Mahmood Reza Azizi ◽  
Alireza Rastegarpanah ◽  
Rustam Stolkin
Keyword(s):  
Mobile Robot ◽  
Collision Avoidance ◽  
Motion Control ◽  
Equations Of Motion ◽  
Dynamic Environments ◽  
Discrete State ◽  
Omnidirectional Mobile Robot ◽  
Planning And Control ◽  
Avoidance Strategy ◽  
And Performance

Motion control in dynamic environments is one of the most important problems in using mobile robots in collaboration with humans and other robots. In this paper, the motion control of a four-Mecanum-wheeled omnidirectional mobile robot (OMR) in dynamic environments is studied. The robot’s differential equations of motion are extracted using Kane’s method and converted to discrete state space form. A nonlinear model predictive control (NMPC) strategy is designed based on the derived mathematical model to stabilize the robot in desired positions and orientations. As a main contribution of this work, the velocity obstacles (VO) approach is reformulated to be introduced in the NMPC system to avoid the robot from collision with moving and fixed obstacles online. Considering the robot’s physical restrictions, the parameters and functions used in the designed control system and collision avoidance strategy are determined through stability and performance analysis and some criteria are established for calculating the best values of these parameters. The effectiveness of the proposed controller and collision avoidance strategy is evaluated through a series of computer simulations. The simulation results show that the proposed strategy is efficient in stabilizing the robot in the desired configuration and in avoiding collision with obstacles, even in narrow spaces and with complicated arrangements of obstacles.

Non-Linear Control of Tilting-Quadcopter Using Feedback Linearization Based Motion Control

2014 ◽  
Author(s):  
Alireza Nemati ◽  
Manish Kumar
Keyword(s):  
Control System ◽  
Dynamic Model ◽  
Motion Control ◽  
Feedback Linearization ◽  
Linear Control ◽  
Control Architecture ◽  
Simulation Studies ◽  
Nonlinear Dynamic Model ◽  
Feedback Linearization Control ◽  
Arbitrary Trajectory

In this paper, a nonlinear control of a tilting rotor quadcopter is presented. The overall control architecture is divided into two sub-controllers. The first controller is based on the feedback linearization control derived from the dynamic model of the tilting quadcopter. This controls the pitch, roll, and yaw motions required for movement along an arbitrary trajectory in space. The second controller is based on two PD controllers which are used to control the tilting of the quadcopter independently along the pitch and the yaw directions respectively. The overall control enables the quadcopter to combine tilting and movement along a desired trajectory simultaneously. Simulation studies are presented based on the developed nonlinear dynamic model of the tilting rotor quadcopter to demonstrate the validity and effectiveness of the overall control system for an arbitrary trajectory tracking.

Approaches to motion control intellectualization of a mobile robot

2021 ◽  
Author(s):  
Stepan A. Lapshinov ◽  
Vadim A. Shakhnov ◽  
Anton V. Yudin
Keyword(s):  
Mobile Robot ◽  
Motion Control ◽  
Control Device ◽  
Alternative Methods ◽  
Design Solution ◽  
Movement Direction ◽  
Software Complex ◽  
Advantages And Disadvantages ◽  
Drive Control ◽  
Omni Wheel

The paper considers the principles of intelligent motion control of mobile robots using the example of omni-wheel modules. The proposed design solution uses components of movement intelligence in any direction, receiving commands from a human operator or above a standing automatic control device, consisting of an angle of movement direction and the required distance of movement. This paper presents an embodiment of using omni-wheels to move a mobile robot over a flat surface. Features of device and application of drive with three omni-wheels in comparison with differential drive are considered. Kinematics, basic principles of motion control formation, hardware and software complex for its implementation are described. There were revealed two alternative methods of organization of drive control in conditions of shortage of low-level hardware resources on the basis of 8-bit microcontroller, their advantages and disadvantages have been analyzed. Process support and materials have been presented that allows realizing the competitive advantages of development while minimizing the cost of components. Features of mobile robot travel route development have been mentioned on the example of competitive practice.

Research on mechanism configuration and dynamic characteristics for multi-split transmission line mobile robot

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wei Jiang ◽  
Yating Shi ◽  
Dehua Zou ◽  
Hongwei Zhang ◽  
Hong Jun Li
Keyword(s):  
Mobile Robot ◽  
Transmission Line ◽  
Dynamic Model ◽  
Dynamic Characteristics ◽  
Transmission Lines ◽  
Dynamic Models ◽  
Working Environment ◽  
Joint Torque ◽  
Content Type ◽  
Working Space

Purpose The purpose of this paper is to achieve the optimal system design of a four-wheel mobile robot on transmission line maintenance, as the authors know transmission line mobile robot is a kind of special robot which runs on high-voltage cable to replace or assist manual power maintenance operation. In the process of live working, the manipulator, working end effector and the working environment are located in the narrow space and with heterogeneous shapes, the robot collision-free obstacle avoidance movement is the premise to complete the operation task. In the simultaneous operation, the mechanical properties between the manipulator effector and the operation object are the key to improve the operation reliability. These put forward higher requirements for the mechanical configuration and dynamic characteristics of the robot, and this is the purpose of the manuscript. Design/methodology/approach Based on the above, aiming at the task of tightening the tension clamp for the four-split transmission lines, the paper proposed a four-wheel mobile robot mechanism configuration and its terminal tool which can adapt to the walking and operation on multi-split transmission lines. In the study, the dynamic models of the rigid robot and flexible transmission line are established, respectively, and the dynamic model of rigid-flexible coupling system is established on this basis, the working space and dynamic characteristics of the robot have been simulated in ADAMS and MATLAB. Findings The research results show that the mechanical configuration of this robot can complete the tightening operation of the four-split tension clamp bolts and the motion of robot each joint meets the requirements of driving torque in the operation process, which avoids the operation failure of the robot system caused by the insufficient or excessive driving force of the robot joint torque. Originality/value Finally, the engineering practicability of the mechanical configuration and dynamic model proposed in the paper has been verified by the physical prototype. The originality value of the research is that it has double important theoretical significance and practical application value for the optimization of mechanical structure parameters and electrical control parameters of transmission line mobile robots.

Fuzzy Logic Controller for Obstacle Avoidance of Mobile Robot

2019 ◽  
Vol 20 (1) ◽  
pp. 51-62
Author(s):  
Rajmeet Singh ◽  
Tarun Kumar Bera
Keyword(s):  
Fuzzy Logic ◽  
Mobile Robot ◽  
Dynamic Model ◽  
Obstacle Avoidance ◽  
Fuzzy Logic Controller ◽  
Fuzzy Controller ◽  
Bond Graph ◽  
Membership Functions ◽  
Current Position ◽  
Dc Motors

AbstractThis work describes design and implementation of a navigation and obstacle avoidance controller using fuzzy logic for four-wheel mobile robot. The main contribution of this paper can be summarized in the fact that single fuzzy logic controller can be used for navigation as well as obstacle avoidance (static, dynamic and both) for dynamic model of four-wheel mobile robot. The bond graph is used to develop the dynamic model of mobile robot and then it is converted into SIMULINK block by using ‘S-function’ directly from SYMBOLS Shakti bond graph software library. The four-wheel mobile robot used in this work is equipped with DC motors, three ultrasonic sensors to measure the distance from the obstacles and optical encoders to provide the current position and speed. The three input membership functions (distance from target, angle and distance from obstacles) and two output membership functions (left wheel voltage and right wheel voltage) are considered in fuzzy logic controller. One hundred and sixty-two sets of rules are considered for motion control of the mobile robot. The different case studies are considered and are simulated using MATLAB-SIMULINK software platform to evaluate the performance of the controller. Simulation results show the performances of the navigation and obstacle avoidance fuzzy controller in terms of minimum travelled path for various cases.

Sign in / Sign up

Export Citation Format

Share Document