Evidence for thermosensitivity of the cotton (Gossypium hirsutum L.) immature fiber (im) mutant via hypersensitive stomatal activity

Thickness of cotton fiber, referred to as fiber maturity, is a key determinant of fiber quality, lint yield, and textile performance. The cotton immature fiber (im) mutant has been used to study fiber maturity since its fiber is thinner than the wild type near isogeneic line (NIL), Texas Marker-1 (TM-1). The im phenotype is caused by a single recessive mutation of a pentatricopeptide repeat (PPR) gene that reduces the activity of mitochondrial complex I and up-regulates stress responsive genes. However, the mechanisms altering the stress responses in im mutant are not well understood. Thus, we characterized growth and gas exchange in im and TM-1 under no stress and also investigated their stress responses by comparing gas exchange and transcriptomic profiles under high temperature. Phenotypic differences were detected between the NILs in non-fiber tissues although less pronounced than the variation in fibers. At near optimum temperature (28±3°C), im maintained the same photosynthetic performance as TM-1 by means of greater stomatal conductance. In contrast, under high temperature stress (>34°C), im leaves reduced photosynthesis by decreasing the stomatal conductance disproportionately more than TM-1. Transcriptomic analyses showed that the genes involved in heat stress responses were differentially expressed between the NIL leaves. These results indicate that the im mutant previously reported to have low activity of mitochondrial complex I displays increased thermosensitivity by impacting stomatal conductance. They also support a notion that mitochondrial complex I activity is required for maintenance of optimal photosynthetic performance and acclimation of plants to high temperature stress. These findings may be useful in the future efforts to understand how physiological mechanisms play a role in determining cotton fiber maturity and may influence stress responses in other crops.

Decellularized dermis extracellular matrix alloderm mechanically strengthens biological engineered tunica adventitia-based blood vessels

The ideal engineered vascular graft would utilize human-derived materials to minimize foreign body response and tissue rejection. Current biological engineered blood vessels (BEBVs) inherently lack the structure required for implantation. We hypothesized that an ECM material would provide the structure needed. Skin dermis ECM is commonly used in reconstructive surgeries, is commercially available and FDA-approved. We evaluated the commercially-available decellularized skin dermis ECM Alloderm for efficacy in providing structure to BEBVs. Alloderm was incorporated into our lab’s unique protocol for generating BEBVs, using fibroblasts to establish the adventitia. To assess structure, tissue mechanics were analyzed. Standard BEBVs without Alloderm exhibited a tensile strength of 67.9 ± 9.78 kPa, whereas Alloderm integrated BEBVs showed a significant increase in strength to 1500 ± 334 kPa. In comparison, native vessel strength is 1430 ± 604 kPa. Burst pressure reached 51.3 ± 2.19 mmHg. Total collagen and fiber maturity were significantly increased due to the presence of the Alloderm material. Vessels cultured for 4 weeks maintained mechanical and structural integrity. Low probability of thrombogenicity was confirmed with a negative platelet adhesion test. Vessels were able to be endothelialized. These results demonstrate the success of Alloderm to provide structure to BEBVs in an effective way.

DETERMINATION OF THE FACTORS LIMITING COTTON FIBER QUALITY IN TURKEY

This study aims to determine the variation of fiber quality in cotton varieties produced in the Southeastern Anatolia Region and Sanliurfa, Diyarbakir provinces. 1090 fiber samples were obtained from 6 cotton varieties (Lima, Stoneville 468, Candia and Babylon for Sanliurfa, Lima, Stoneville 468, Lodos and Gloria for Diyarbakir) collected from ginning factories in Sanliurfa and Diyarbakir. Statistical analyzes were done with HVI device and obtained data were analyzed by using Excel and TOTEMSTAT programs. In the frequency distribution, cotton varieties of the region are in the medium and long fiber group in terms of fiber length. They were in the medium (only two samples), strong and very strong group in terms of fiber strength. They were generally in the medium and thick group in terms of fiber fineness (micronaire). In terms of fiber uniformity index, the majority of the fibers were in the middle group. In terms of short fiber index, most of the fibers were in the very low and low groups. The majority of the samples were in the high and medium group in terms of fiber elongation, in the mature and very mature group in terms of fiber maturity. In terms of spinning consistency index (SCI) 59,2% of the fibers were between 119,41 and 135,83; 31,3% of them, were between 135,83 and 152,24, 58,2% of the material has a reflectance value of 74 and above. All materials were in white and light-yellow groups in terms of yellowness. It has been observed that the majority of the fibers (66%) are in the low group in terms of trash count. The results obtained from the study of cotton produce of Southeastern Anatolia Region of Turkey has shown that good fiber quality and to meet the demand of textile industry.

Change Of Cotton Fiber Quality Indicators Under Technological Processes

In this article, the quality indicators of fiber under the influence of various technological processes of Sultan selection cotton were determined and the optimal variant of the technological process for production was recommended. Basic expressions tangled fiber, cortical fiber, knot, staple mass length, specific tensile strength, fiber maturity.

Decellularized Dermis Extracellular Matrix Alloderm as a Scaffold for Biological Engineered Blood Vessels

The ideal engineered vascular graft would utilize human-derived materials to minimize foreign body response and tissue rejection. Current biological engineered blood vessels (BEBVs) inherently lack the structure required for implantation. Current methods of mechanical conditioning to encourage extracellular matrix (ECM) deposition requires weeks to months, impeding translation. We hypothesized that an ECM scaffold would provide the structure needed. Skin dermis ECM is commonly used in reconstructive surgeries, is commercially available and is FDA-approved. We evaluated the commercially available decellularized skin dermis ECM called Alloderm for its efficacy in providing structure to biological engineered blood vessels. Alloderm was seeded with fibroblast cells typically found in the adventitia during integration into our lab’s unique protocol for generating BEBVs. To assess structure, tissue mechanics were analyzed. Standard BEBVs without Alloderm exhibited a tensile strength of 67.9 ± 9.78 kPa, whereas Alloderm integrated BEBVs showed a significant increase in strength to 1500 ± 334 kPa. In comparison, native vessel strength is 1430 ± 604 kPa. Burst pressure reached 51.3 ± 2.19 mmHg. Total collagen and fiber maturity were significantly increased due to the presence of the scaffolding material. These results demonstrate the success of Alloderm to provide structure to BEBVs in an effective way.

Potassium application to the cover crop prior to cotton planting as a fertilization strategy in sandy soils

Urochloa grasses are used as cover crops in tropical cropping systems under no-till to improve nutrient cycling. We hypothesized that potassium (K) applied to ruzigrass (Urochloa ruziziensis) grown before cotton in a sandy soil could be timely cycled and ensure nutrition, yield and quality of cotton cultivars with no need to split K application. Field experiments were performed with different K managements, applied to ruzigrass, to cotton grown after grass and without grass, or split as it is done conventionally. No yield differences were observed on K fertilized treatments. At 0 K, cotton yields were low, but they increased by 16% when ruzigrass was grown before, and short fiber content was lower when there was more K available. Ruzigrass grown before cotton increased micronaire as much as the application of 116 kg ha−1 of K without the grass. Fiber maturity was higher when K was applied to the grass or split in the grass and sidedressed in cotton. Growing ruzigrass before cotton allows for early K fertilization, i.e., application of all the fertilizer to de grass, since the nutrient is recycled, and cotton K nutrition is not harmed. Eventually K rates could be reduced as a result of higher efficiency of the systems.

Statistical analysis of fiber quality to obtain a correlation between the fiber and yarn quality

The purpose of this research was to make a correlation between the fiber and yarn quality based on different properties of the fiber. The properties of cotton fiber were tested by the High Volume Instrument (HVI) machine. Firstly, we collect fiber from a different lot and then tested the properties by the High Volume Instrument (HVI) Machine. After that, we made yarn from that lot and made the same count of yarn. The tested properties were mic, length, maturity, strength, elongation, moisture, etc. The same count of yarn was tested by the USTER EVENESS TESTER machine. Comparing the HVI report and the USTER TESTER report, we saw that how to effect different fiber properties of the different lot on the same count of yarn quality. Then we made a correlation between them. The observation suggested that yarn strength and fineness are depended upon fiber maturity. This paper reports a glimpse of the effect of fiber properties on yarn quality.