Photodetectors Based on Micro-nano Structure Material

Photodetectors converting optical signals into electrical signals have been widely utilized and have received more and more attention in scientific research and industrial fields including optical interconnection, optical communication, and environmental monitoring. Herein, we summarize the latest development of photodetectors with different micro-nano structures and different materials and the performance indicators of photodetectors. Several photodetectors, such as flexible, ultraviolet two-dimensional (2D) microscale, and dual-band photodetectors, are listed in this minireview. Meanwhile, the current bottleneck and future development prospects of the photodetector are discussed.

Fault Tolerance of Optical Hypercube Interconnection Networks with r -Communication Pattern

As power grids and optical interconnection networks are interdependent, the reliabilities of the optical networks are critical issues in power systems. The optical networks hold prominent performance including wide bandwidth, low loss, strong anti-interference capability, high fidelity, and reliable performance. They are regarded as promising alternatives to electrical networks for parallel processing. This paper is aimed at taking the first step in understanding the communication efficiencies of optical networks. For that purpose, on optical networks, we propose a series of novel notions including communication pattern, r -communication graph, reduced diameter, enhanced connectivity, r -diameter, and r -connectivity. Using these notions, we determine that the r -diameter and r -connectivity of the optical n -dimensional hypercube network are n / r and n 1 + n 2 + ⋯ + n r , respectively. Since the parameter r is variable, we can adjust different values of r on the basis of the wavelength resources and load of the optical networks, achieving enhanced communication efficiencies of these networks. Compared with the electric n -dimensional hypercube network, the proposed communication pattern on the optical hypercube network not only reduces the maximum communication delay of the conventional electrical hypercube significantly but also improves its fault tolerance remarkably.

An N-Port Universal Multimode Optical Router Supporting Mode-Division Multiplexing

Optical network-on-chip (ONoC) is based on optical interconnects and optical routers (ORs), which have obvious advantages in bandwidth and power consumption. Transmission capacity is a significant performance in ONoC architecture, which has to be fully considered during the design process. Relying on mode-division multiplexing (MDM) technology, the system capacity of optical interconnection is greatly improved compared to the traditional multiplexing technology. With the explosion in MDM technology, the optical router supporting MDM came into being. In this paper, we design a multimode optical router (MDM-OR) model and analyze its indicators. Above all, we propose a novel multimode switching element and design an N-port universal multimode optical router (MDM-OR) model. Secondly, we analyze the insertion loss model of different optical devices and the crosstalk noise model of N-port MDM-OR. On this basis, a multimode router structure of a single-mode five-port optical router is proposed. At the same time, we analyze the transmission loss, crosstalk noise, signal-to-noise radio (OSNR), and bit error rate (BER) of different input–output pairs by inputting the 1550 nm TE0, TE1, and TE2 modes to the router.

Pure Graphene Oxide Vertical p–n Junction with Remarkable Rectification Effect

Graphene p-n junctions have important applications in the fields of optical interconnection and low–power integrated circuits. Most current research is based on the lateral p-n junction prepared by chemical doping and other methods. Here, we report a new type of pure graphene oxide (pGO) vertical p-n junctions which do not dope any other elements but only controls the oxygen content of GO. The I–V curve of the pGO vertical p–n junction demonstrates a remarkable rectification effect. In addition, the pGO vertical p–n junction shows stability of its rectification characteristic over long-term storage for six months when sealed and stored in a PE bag. Moreover, the pGO vertical p–n junctions have obvious photoelectric response and various rectification effects with different thicknesses and an oxygen content of GO, humidity, and temperature. Hall effect test results show that rGO is an n–type semiconductor; theoretical calculations and research show that GO is generally a p–type semiconductor with a bandgap, thereby forming a p–n junction. Our work provides a method for preparing undoped GO vertical p–n junctions with advantages such as simplicity, convenience, and large–scale industrial preparation. Our work demonstrates great potential for application in electronics and highly sensitive sensors.

K-means Cluster Algorithm Applied for Geometric Shaping Based on Iterative Polar Modulation in Inter-Data Centers Optical Interconnection

The demand of delivering various services is driving inter-data centers optical interconnection towards 400 G/800 G, which calls for increasing capacity and spectrum efficiency. The aim of this study is to effectively increase capacity while also improving nonlinear noise anti-interference. Hence, this paper presents a state-of-the-art scheme that applies the K-means cluster algorithm in geometric shaping based on iterative polar modulation (IPM). A coherent optical communication simulation system was established to demonstrate the performance of our proposal. The investigation reveals that the gap between IPM and Shannon limit has significantly narrowed in terms of mutual information. Moreover, when compared with IPM and QAM using the blind phase searching under the same order at HD-FEC threshold, the IPM-16 using the K-means algorithm achieves 0.9 dB and 1.7 dB gain; the IPM-64 achieves 0.3 dB and 1.1 dB gain, and the IPM-256 achieves 0.4 dB and 0.8 dB gain. The robustness of nonlinear noise and high capacity enable this state-of-the-art scheme to be used as an optional modulation format not only for inter-data centers optical interconnection but also for any high speed, long distance optical fiber communication system.

Inverse-designed ultra-compact high efficiency and low crosstalk optical interconnect based on waveguide crossing and wavelength demultiplexer

In this paper, we use the inverse design method to design an optical interconnection system composed of wavelength demultiplexer and the same direction waveguide crossing on silicon-on-insulator (SOI) platform. A 2.4 μm × 3.6 μm wavelength demultiplexer with an input wavelength of 1.3–1.6 μm is designed. When the target wavelength of the device is 1.4 μm, the insertion loss of the output port is − 0.93 dB, and there is − 18.4 dB crosstalk, in TE0 mode. The insertion loss of the target wavelength of 1.6 μm in TE0 mode is − 0.88 dB, and the crosstalk is − 19.1 dB. Then, we designed a same direction waveguide crossing, the footprint is only 2.4 μm × 3.6 μm, the insertion loss of the wavelength 1.4 μm and 1.6 μm in TE0 mode is − 0.99 dB and − 1 dB, and the crosstalk is − 12.14 dB and − 14.34 dB, respectively. Finally, an optical interconnect structure composed of two devices is used, which can become the most basic component of the optical interconnect network. In TE0 mode, the insertion loss of the output wavelength of 1.4 μm at the output port is − 1.3 dB, and the crosstalk is − 29.36 dB. The insertion loss of the output wavelength of 1.6 μm is − 1.39 dB, and the crosstalk is − 38.99 dB.