Modeling spray combustion using multi-component surrogate fuels

Kerosene and diesel fuels involved in spray combustion operations are complex fuels composed of a wide and diverse variety of hydrocarbon components. For practical numerical modeling of the evaporation and combustion phenomena in a combustor, well-designed surrogates fuels that can mimic the real fuel thermal and chemical properties can be utilized. In this study, predictions and validations of the influence of fuel on the liquid and vapor penetration characteristics within a constant-volume chamber were first performed utilizing a benchmark m-xylene/ n-dodecane, Jet-A, and diesel surrogate fuels. Then, simulations of reacting spray of a bi-component m-xylene/ n-dodecane fule, and a four-component Jet-A surrogate fuel ( n-dodecane (C12H26), iso-cetane (C16H34), trans-decalin (C10H18) and toluene (C7H8)) were studied aided by skeleton chemical kinetic mechanisms available from the literature. The results of ignition delay time, lift-off length, radicals, and the mass fraction histories of fuel species were comprehensively used to assess the performance of relevant thermophysical and chemical sub-models. Two different chemical mechanisms were compared in detail to investigate the effect of the chemical kinetics model on the flame structures and spray characteristics. It has been found that the spray ignition of multi-component fuels is remarkably influenced by the chosen chemical kinetic mechanism and less affected by the droplet evaporation models.

Assessment of the Oxidative Desulfurization of Middle Distillate Surrogate Fuels with Spectroscopic Techniques

The oxidative desulfurization of five (5) model sulfur compounds and eleven (11) surrogate blends was investigated using the hydrogen peroxide (H2O2)-acetic acid (CH3COOH) system. Consequently, extractive desulfurization was carried out using conventional solvents. The model sulfur compounds, as well as the solvent, are present in petroleum middle distillates. The selection of the compounds was made so that they represent various kinds of sulfur compounds. The goal of this study was the implementation of a simple and economical oxidative and extractive system for the desulfurization of surrogate mixtures with an intermediate sulfur concentration 1% w/w, at the mild temperature of 70°C, and without the use of supplementary and assisting methods such as heterogeneous catalysis or ultrasound irradiation. The sulfur content was estimated using X-ray fluorescence. The progress of the oxidation reaction was monitored using liquid FT-IR. The solid sediments of the oxidation procedure were identified with solid-state FT-IR and 1H NMR spectroscopy.