Broadband Performance Assessment of an RF Power Transistor Employing the Real Frequency Technique

selected active device is essential to design an RF power amplifier for optimum gain and power added efficiency. As they are obtained, these impedances may not be realizable network functions over the desired frequency band to yield the input and the output matching networks for the amplifier. Therefore, in this paper, first, we introduce a new method to test if a given impedance is realizable. Then, a novel “Real Frequency Line Segment Technique” based numerical procedure is introduced to assess the gain-bandwidth limitations of the given source and load impedances, which in turn results in the ultimate RF-power intake/ delivering performance of the amplifier. During the numerical performance assessments process, a robust tool called “Virtual Gain Optimization” is presented. Finally, a new definition called “Power-Performance-Product” is introduced to measure the quality of an active device. Examples are presented to test the realizability of the given source/load pull data and to assess the gain-bandwidth limitations of the given source/load pull impedances for a 45W-GaN power transistor, namely “Cree CG2H40045”, over 0.8 -3.8 GHz bandwidth.

Broadband Performance Assessment of an RF Power Transistor Employing the Real Frequency Technique

selected active device is essential to design an RF power amplifier for optimum gain and power added efficiency. As they are obtained, these impedances may not be realizable network functions over the desired frequency band to yield the input and the output matching networks for the amplifier. Therefore, in this paper, first, we introduce a new method to test if a given impedance is realizable. Then, a novel “Real Frequency Line Segment Technique” based numerical procedure is introduced to assess the gain-bandwidth limitations of the given source and load impedances, which in turn results in the ultimate RF-power intake/ delivering performance of the amplifier. During the numerical performance assessments process, a robust tool called “Virtual Gain Optimization” is presented. Finally, a new definition called “Power-Performance-Product” is introduced to measure the quality of an active device. Examples are presented to test the realizability of the given source/load pull data and to assess the gain-bandwidth limitations of the given source/load pull impedances for a 45W-GaN power transistor, namely “Cree CG2H40045”, over 0.8 -3.8 GHz bandwidth.

EAST steady-state long pulse H-mode with core-edge integration for CFETR

Recent EAST experiment has successfully demonstrated long pulse steady-state high plasma performance scenario and core-edge integration since the last IAEA in 2018. A discharge with a duration over 60s with βP ~2.0, βN ~1.6, H98y2~1.3 and internal transport barrier on electron temperature channel is obtained with multi-RF power heating and current drive. A higher βN (βN~1.8, βp~2.0, H98y2~1.3, ne/nGW~0.75) with a duration of 20s is achieved by using the modulated neutral beam and multi-RF power, where several normalized parameters are close or even higher than the phase III 1GW scenario of CFETR steady-state. High-Z impurity accumulation in the plasma core is well controlled in a low level by using the on-axis ECH. Modelling shows that the strong diffusion of TEM turbulence in the central region prevents tungsten impurity to accumulate. More recently, EAST has demonstrated compatible core-edge integration discharges in the high βp scenario: high confinement H98y2>1.2 with high βP~2.5/βN~2.0 and fbs~50% is sustained with reduced divertor heat flux at high density ne/nGW~0.7 and moderate q95~6.7. By combining active impurity seeding through radiative divertor feedback control and strike point splitting induced by resonant perturbation coil, the peak heat flux is reduced by 20-30% on the ITER-like tungsten divertor, here a mixture of 50% neon and 50% D2 is applied.

Design of a Highly Efficient Wideband Multi-Frequency Ambient RF Energy Harvester

For low input radio frequency (RF) power from −35 to 5 dBm, a novel quad-band RF energy harvester (RFEH) with an improved impedance matching network (IMN) is proposed to overcome the poor conversion efficiency and limited RF power range of the ambient environment. In this research, an RF spectral survey was performed in the semi-urban region of Malaysia, and using these results, a multi-frequency highly sensitive RF energy harvester was designed to harvest energy from available frequency bands within the 0.8 GHz to 2.6 GHz frequency range. Firstly, a new IMN is implemented to improve the rectifying circuit’s efficiency in ambient conditions. Secondly, a self-complementary log-periodic higher bandwidth antenna is proposed. Finally, the design and manufacture of the proposed RF harvester’s prototype are carried out and tested to realize its output in the desired frequency bands. For an accumulative −15 dBm input RF power that is uniformly universal across the four radio frequency bands, the harvester’s calculated dc rectification efficiency is about 35 percent and reaches 52 percent at −20 dBm. Measurement in an ambient RF setting shows that the proposed harvester is able to harvest dc energy at −20 dBm up to 0.678 V.

Полноволновое двумерное моделирование распространения и поглощения геликонов в плазме сферического токамака Глобус-М2

Numerical modeling of propagation and absorption of fast waves (helicons) with frequency 200 MHz in 2D inhomogeneous plasma of the spherical tokamak Globus-M2 was carried out with 2D full-wave code. Toroidal effects, poloidal magnetic field and the actual shape of the flux surfaces were taken into account. The full wave electric field and RF power absorption profiles were computed by solving plasma wave equation with electron Landau damping term. The modeling demonstrated a fairly high efficiency of helicons absorption in the bulk plasma within a wide range of experimental parameters. The waves propagate to the inner regions of the plasma column and are mainly absorbed there; less than 20% of RF energy returns back to the plasma periphery.

Comparison of Prediction Programs for Short Wave Circuit Link from Iraq to Test points on Both Earth Hemispheres during Solar Minimum

This paper compare the accurecy of HF propagation prediction programs for HF circuits links between Iraq and different points world wide during August 2018 when solar cycle 24 (start 2009 end 2020) is at minimun activity and also find out the best communication mode used. The prediction programs like Voice of America Coverage Analysis Program (VOACAP) and ITU Recommendation RS 533 (REC533 ) had been used to generat HF circuit link parameters like Maximum Usable Frequency ( MUF) and Frequency of Transsmision (FOT) .Depending on the predicted parameters (data) , real radio contacts had been done using a radio transceiver from Icom model IC 7100 with 100W RF power, tuner box and homemade dipole antenna of 10 m length and 8m height above ground. From correlation between the predicted data and observed data the result was not accurate .