Microstructural characterization of laser-melted/roller-quenched dicalcium silicate

1988 ◽  
Vol 46 ◽  
pp. 582-583
Author(s):  
C. J. Chan ◽  
K. R. Venkatachari ◽  
W. M. Kriven ◽  
J. F. Young
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Shape Change ◽  
Microstructural Characterization ◽  
Particle Size Effect ◽  
Dicalcium Silicate ◽  
Laser Melting ◽  
Uniform Size ◽  
Cell Shape Change ◽  
Wide Range

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

A dominant inhibitory version of the small GTP-binding protein Rac disrupts cytoskeletal structures and inhibits developmental cell shape changes in Drosophila

Development ◽  
1995 ◽  
Vol 121 (3) ◽  
pp. 903-914 ◽  
Author(s):  
N. Harden ◽  
H.Y. Loh ◽  
W. Chia ◽  
L. Lim
Keyword(s):  
Epidermal Cell ◽  
Cell Shape ◽  
Shape Change ◽  
Yeast Cells ◽  
Cell Shape Change ◽  
Gtp Binding ◽  
Wide Range ◽  
Cell Shape Changes ◽  
Germband Retraction ◽  
Shape Changes

The Rho subfamily of Ras-related small GTP-binding proteins is involved in regulation of the cytoskeleton. The cytoskeletal changes induced by two members of this subfamily, Rho and Rac, in response to growth factor stimulation, have dramatic effects on cell morphology. We are interested in using Drosophila as a system for studying how such effects participate in development. We have identified two Drosophila genes, DRacA and DRacB, encoding proteins with homology to mammalian Rac1 and Rac2. We have made transgenic flies bearing dominant inhibitory (N17DRacA), and wild-type versions of the DRacA cDNA under control of an Hsp70 promoter. Expression of the N17DRacA transgene during embryonic development causes a high frequency of defects in dorsal closure which are due to disruption of cell shape changes in the lateral epidermis. Embryonic expression of N17DRacA also affects germband retraction and head involution. The epidermal cell shape defects caused by expression of N17DRacA are accompanied by disruption of a localized accumulation of actin and myosin thought to be driving epidermal cell shape change. Thus the Rho subfamily may be generating localized changes in the cytoskeleton during Drosophila development in a similar fashion to that seen in mammalian and yeast cells. The Rho subfamily is likely to be participating in a wide range of developmental processes in Drosophila through its regulation of the cytoskeleton.

Microstructural characterization of Ca2SiO4 particles in a CaZrO3 and a MgO matrix

1990 ◽  
Vol 48 (4) ◽  
pp. 1050-1051
Author(s):  
Y. J. Kim ◽  
E. Mast ◽  
T. I. Hou ◽  
W. M. Kriven
Keyword(s):  
Atmospheric Pressure ◽  
Cell Shape ◽  
Shape Change ◽  
Pechini Method ◽  
Microstructural Characterization ◽  
Acrylic Resin ◽  
Composite Ceramic ◽  
Volume Increase ◽  
Cell Shape Change

Dicalcium silicate (abbreviated C2S) has five polymorphs at atmospheric pressure. The monoclinic (β) to orthorhombic (γ) transformation is accompanied by a 12 % volume increase on cooling and a 4.6° unit cell shape change. These analogies to ZrO2 make C2S a potential transformation toughener. Recently C2S particles have been successfully mixed with a calcium zirconate (abbreviated CZ) phase to form a composite ceramic with a microstructure similar to ZTA.The two composites were prepared in different ways. For the C2S/CZ composite, C2S powder was prepared by the Pechini method with starting materials of Ca(NO3)2 and colloidal silica. 10 vol % C2S was mixed with CZ and sintered at 1600°C for 2 hours. For the C2S/MgO composite, C2S powder was formed by reaction of SiO2.xH2O and CaCO3 at 1450°C. Solutions containing 15 vol % C2S were mixed with solutions of fine magnesia containing an acrylic resin. The suspension was dried and sintered at 1600°C for 3.5 hours. Microstructures of both composites were examined by SEM and TEM.

Gluten-Free Dry Mixtures with Rice and Amaranth for Children over Three Years Old with Gluten Intolerance

Food Industry ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 23-31
Author(s):  
Sergey Urubkov ◽  
Svetlana Khovanskaya ◽  
Ekaterina Pyrieva ◽  
Olga Georgieva ◽  
Stanislav Smirnov
Keyword(s):  
Celiac Disease ◽  
Treatment Effectiveness ◽  
Raw Materials ◽  
Calculated Data ◽  
Limited Range ◽  
Gluten Free ◽  
Fruit And Vegetable ◽  
Organoleptic Evaluation ◽  
Free Products ◽  
Wide Range

Diet therapy is one of the main approaches to the treatment of a wide range of diseases of the digestive system. The treatment effectiveness of celiac disease depends on how strictly the patient adheres to a gluten-free diet. It is often disrupted due to the limited range of recommended foods and dishes, especially for children who are particularly sensitive to dietary restrictions. In this case, the development of new types of specialized gluten-free products is relevant, allowing to expand the diet both in terms of nutritional value and taste diversity. This study concerns the recipe developments of dry gluten-free mixtures using rice and amaranth with the inclusion of fruit and vegetable and berry raw materials intended for the nutrition of children over three years old suffering from celiac disease. When developing the recipes, researchers used various combinations of rice and amaranth flour, as well as fruit and vegetable powders. The rice flour composition varied in the range from 15 to 75%; amaranth – from 15 to 45%; fruit and vegetable and berry powders – up to 10%. The finished product was gluten-free cookies, muffins, pancakes made of rice and amaranth. Organoleptic evaluation showed that the studied samples of gluten-free cookies have high quality characteristics, have a pleasant taste and aroma. According to the calculated data, specialized gluten-free dry mixtures intended for children over three years with celiac disease can serve as an important source of: vegetable carbohydrates – from 26.81 to 55.19 g / 100g of finished products; protein – from 4.06 to 11.82 g/100g of finished products; dietary fiber – from 3.82 to 6.36 g/100g of finished products; and energy – from 158.12 to 333.96 kcal/100g of finished products) The developed recipess of gluten-free products can help to provide children with an adequate amount of nutrients and energy.

Safety assessment of biological raw materials in the system of medicines quality assurance

2020 ◽  
pp. 63-72
Author(s):  
Yu. Olefir ◽  
E. Sakanyan ◽  
I. Osipova ◽  
V. Dobrynin ◽  
M. Smirnova ◽  
...  
Keyword(s):  
Raw Materials ◽  
State Level ◽  
The State ◽  
Spongiform Encephalopathy ◽  
Safety Standards ◽  
Wide Range ◽  
The Russian Federation ◽  
Key Aspects ◽  
First Time ◽  
Medicines Quality

The entry of a wide range of biotechnological products into the pharmaceutical market calls for rein-forcement of the quality, efficacy and safety standards at the state level. The following general monographs have been elaborated for the first time to be included into the State Pharmacopoeia of the Russian Federation, XIV edition: "Viral safety" and "Reduction of the risk of transmitting animal spongiform encephalopathy via medicinal products". These general monographs were elaborated taking into account the requirements of foreign pharmacopoeias and the WHO recommendations. The present paper summarises the key aspects of the monographs.

scholarly journals Influence of Particle Size on Laser Absorption and Scanning Track Formation Mechanisms of Pure Tungsten Powder During Selective Laser Melting

Engineering ◽  
2019 ◽  
Vol 5 (4) ◽  
pp. 736-745 ◽  
Author(s):  
Jiayao Zhang ◽  
Dongdong Gu ◽  
Ying Yang ◽  
Hongmei Zhang ◽  
Hongyu Chen ◽  
...  
Keyword(s):  
Particle Size ◽  
Selective Laser Melting ◽  
Tungsten Powder ◽  
Formation Mechanisms ◽  
Pure Tungsten ◽  
Laser Melting ◽  
Laser Absorption ◽  
Track Formation

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Leaching Behaviour of Construction and Demolition Wastes and Recycled Aggregates: Statistical Analysis Applied to the Release of Contaminants

2021 ◽  
Vol 11 (14) ◽  
pp. 6265
Author(s):  
Alessandra Diotti ◽  
Giovanni Plizzari ◽  
Sabrina Sorlini
Keyword(s):  
Particle Size ◽  
Statistical Analysis ◽  
Raw Materials ◽  
Primary Source ◽  
Recycled Aggregates ◽  
Critical Parameters ◽  
Material Particle ◽  
Analysis Methodology ◽  
Construction And Demolition Wastes ◽  
Leaching Behaviour

Construction and demolition wastes represent a primary source of new alternative materials which, if properly recovered, can be used to replace virgin raw materials partially or totally. The distrust of end-users in the use of recycled aggregates is mainly due to the environmental performance of these materials. In particular, the release of pollutants into the surrounding environment appears to be the aspect of greatest concern. This is because these materials are characterized by a strong heterogeneity which can sometimes lead to contaminant releases above the legal limits for recovery. In this context, an analysis of the leaching behaviour of both CDWs and RAs was conducted by applying a statistical analysis methodology. Subsequently, to evaluate the influence of the particle size and the volumetric reduction of the material on the release of contaminants, several experimental leaching tests were carried out according to the UNI EN 12457-2 and UNI EN 12457-4 standards. The results obtained show that chromium, mercury, and COD are the most critical parameters for both CDWs and RAs. Moreover, the material particle size generally affects the release of contaminants (i.e., finer particles showed higher releases), while the crushing process does not always involve higher releases than the sieving process.

scholarly journals Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 232
Author(s):  
Pedro J. Sánchez-Soto ◽  
Eduardo Garzón ◽  
Luis Pérez-Villarejo ◽  
George N. Angelopoulos ◽  
Dolores Eliche-Quesada
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Phase Evolution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Mining Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.

Sign in / Sign up

Export Citation Format

Share Document