Description of a coupled atmosphere - fire model

2004 ◽  
Vol 13 (1) ◽  
pp. 49 ◽  
Author(s):  
Terry L. Clark ◽  
Janice Coen ◽  
Don Latham
Keyword(s):  
Mesoscale Model ◽  
Mass Loss Rate ◽  
Fire Behavior ◽  
Fire Spread ◽  
Direct Result ◽  
Tall Grass ◽  
Fire Propagation ◽  
Tracer Particles ◽  
Moisture Fluxes ◽  
Contour Advection

This paper describes a coupled fire–atmosphere model that uses a sophisticated high-resolution non-hydrostatic numerical mesoscale model to predict the local winds which are then used as input to the prediction of fire spread. The heat and moisture fluxes from the fire are then fed back to the dynamics, allowing the fire to influence its own mesoscale winds that in turn affect the fire behavior. This model is viewed as a research model and as such requires a fireline propagation scheme that systematically converges with increasing spatial and temporal resolution. To achieve this, a local contour advection scheme was developed to track the fireline using four tracer particles per fuel cell, which define the area of burning fuel. Using the dynamically predicted winds along with the terrain slope and fuel characteristics, algorithms from the BEHAVE system are used to predict the spread rates. A mass loss rate calculation, based on results of the BURNUP fuel burnout model, is used to treat heat exchange between the fire and atmosphere. Tests were conducted with the uncoupled model to test the fire-spread algorithm under specified wind conditions for both spot and line fires. Using tall grass and chaparral, line fires were simulated employing the full fire–atmosphere coupling. Results from two of these experiments show the effects of fire propagation over a small hill. As with previous coupled experiments, the present results show a number of features common to real fires. For example, we show how the well-recognized elliptical fireline shape is a direct result of fire–atmosphere interactions that produce the ‘heading’, ‘flanking’, and ‘backing’ regions of a wind-driven fire with their expected behavior. And, we see how perturbations upon this shape sometimes amplify to become fire whirls along the flanks, which are transported to the head of the fire where they may interact to produce erratic fire behavior.

scholarly journals Reconstruction of Grenfell Tower fire. Part 3—Numerical simulation of the Grenfell Tower disaster: Contribution to the understanding of the fire propagation and behaviour during the vertical fire spread

2019 ◽  
Vol 44 (1) ◽  
pp. 35-57 ◽  
Author(s):  
Eric Guillaume ◽  
Virginie Dréan ◽  
Bertrand Girardin ◽  
Faiz Benameur ◽  
Maxime Koohkan ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Fire Spread ◽  
Fire Propagation

scholarly journals COMPORTAMENTO DO FOGO EM QUEIMAS CONTROLADAS DE VEGETAÇÃO DE ESTEPE NO MUNICÍPIO DE PALMEIRA, PARANÁ, BRASIL

FLORESTA ◽  
2013 ◽  
Vol 43 (4) ◽  
pp. 557
Author(s):  
Celso Darci Seger ◽  
Antonio Carlos Batista ◽  
Alexandre França Tetto ◽  
Ronaldo Viana Soares
Keyword(s):  
Fire Behavior ◽  
Fire Risk ◽  
Fire Spread ◽  
Flame Height ◽  
Fire Intensity ◽  
Average Moisture Content ◽  
Fuel Loading ◽  
Prescribed Burns ◽  
Controlled Burning ◽  
Heat Released

As queimas controladas constituem práticas de manejo utilizadas em diferentes tipos de vegetação e difundidas em vários países. No entanto, para a realização de tais práticas com segurança e eficiência é fundamental o conhecimento do comportamento do fogo. O objetivo desse trabalho foi caracterizar o comportamento do fogo em queimas controladas de vegetação Estepe Gramíneo-Lenhosa no estado do Paraná. Para isso, foi instalado um experimento no município de Palmeira, onde 20 parcelas foram queimadas, sendo metade a favor e metade contra o vento. A carga de material combustível fino estimada foi de 2,26 kg.m-2, com teor médio de umidade de 50,45%. A quantidade de material consumido pela queima foi de 1,76 kg.m-2, com uma eficiência média de queima de 76,86%. As médias obtidas, a favor e contra o vento, foram respectivamente: velocidade de propagação do fogo de 0,049 e 0,012 m.s-1, altura das chamas de 1,34 e 0,843 m, intensidade do fogo de 210,53 e 50,68 kcal.m-1.s-1 e calor liberado de 4.067,19 e 4.508,92 kcal.m-2. Os resultados permitiram concluir que as queimas controladas em vegetação de campos naturais, realizadas dentro dos critérios estabelecidos de planos de queima, são viáveis e seguras sob o ponto de vista de perigo de incêndios.Palavras chave: Queima prescrita; material combustível; intensidade do fogo; perigo de incêndios. AbstractFire behavior of prescribed burns in grassland on Palmeira county, Paraná, Brazil. The prescribed burns are practices of management used in different types of vegetation and widespread in several countries. However, to carry out such practices safely and effectively is fundamental knowledge of fire behavior. The aim of this study was to characterize the fire behavior in controlled burning of grassland vegetation in Paraná state. For this, an experiment was conducted in Palmeira County, where 20 plots were burned, half in favor and half against the wind. The estimated fine fuel loading was 2.26 kg.m-2, with average moisture content of 50.45%. The fuel consumption by burning was 1.76 kg.m-2 with an average efficiency of burning of 76.86%. The averages, for and against the wind, were: speed of fire spread of 0.049 and 0.012 m.s-1, the flame height of 1.34 m and 0.843, fire intensity of 210.53 and 50.68 kcal.m-1.s-1 and heat released from 4,067.19 and 4,508.92 kcal.m-2. The results show that the controlled burnings of grasslands vegetation, carried out within the established criteria burning plans are feasible and safe from the aspect of fire danger.Keywords: Prescribed burns; fuel loading; fire intensity; fire risk.

Reaction times and burning rates for wind tunnel headfires

2003 ◽  
Vol 12 (2) ◽  
pp. 195 ◽  
Author(s):  
Ralph M. Nelson, Jr.
Keyword(s):  
Reaction Time ◽  
Wind Tunnel ◽  
Wildland Fire ◽  
Mass Loss Rate ◽  
Fire Behavior ◽  
Reaction Times ◽  
Reaction Time Data ◽  
Combustion Regime ◽  
Fuel Particle ◽  
Time Data

Catchpole et al. (1998) reported rates of spread for 357 heading and no-wind fires burned in the wind tunnel facility of the USDA Forest Service's Fire Sciences Laboratory in Missoula, Montana for the purpose of developing models of wildland fire behavior. The fires were burned in horizontal fuel beds with differing characteristics due to various combinations of fuel type, particle size, packing ratio, bed depth, moisture content, and wind speed. In the present paper, fuel particle and fuel bed data for 260 heading fires from that study (plus as-yet unreported combustion efficiency and reaction time data) are used to develop models for predicting fuel bed reaction time and mass loss rate. Reaction time is computed from the flameout time of a single particle and fuel bed structural properties. It is assumed that the beds burn in a combustion regime controlled by the rate at which air mixes with volatiles produced during pyrolysis, and that not all air entering the fuel bed reaction zone participates in combustion. Comparison of reaction time and burning rate predictions with experimental values is encouraging in view of the simplified modeling approach and uncertainties associated with the experimental measurements.

scholarly journals Numerical Investigations on the Propagation of Fire in a Railway Carriage

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4999
Author(s):  
Matthew Craig ◽  
Taimoor Asim
Keyword(s):  
Fire Spread ◽  
Ignition Energy ◽  
Fire Dynamics ◽  
Fire Propagation ◽  
Average Temperature ◽  
Smoke Density ◽  
Smoke Layer ◽  
Most Significant Change ◽  
Computational Fluid Dynamics Cfd ◽  
Safety Guidelines

In this study, advanced Computational Fluid Dynamics (CFD)-based numerical simulations have been performed in order to analyse fire propagation in a standard railway compartment. A Fire Dynamics Simulator (FDS) has been employed to mimic real world scenarios associated with fire propagation within railway carriages in order to develop safety guidelines for railway passengers. Comprehensive parametric investigations on the effects of ignition location, intensity and cabin upholstery have been carried out. It has been observed that a fire occurring near the exits of the carriage results in a lower smoke layer height, due to the local carriage geometry, than an identical fire igniting at the center of the carriage. This in turn causes the smoke density along the aisleway to vary by around 30%. Reducing the ignition energy by half has been found to restrict combustion, thus reducing smoke density and carbon exhaust gases, reducing the average temperature from 170 °C to 110 °C. Changing the material lining of the seating has been found to cause the most significant change in output parameters, despite its relative insignificance in bulk mass. A polyester sample produces a peak carbon monoxide concentration of 7500 ppm, which is 27× greater compared with nylon. This difference has been found to be due to the fire spread and propagation between fuels, signifying the polyester’s unsuitability for use in railway carriages.

Observing the Dynamics of Wildland Grass Fires: FireFlux—A Field Validation Experiment

2007 ◽  
Vol 88 (9) ◽  
pp. 1369-1382 ◽  
Author(s):  
Craig B. Clements ◽  
Shiyuan Zhong ◽  
Scott Goodrick ◽  
Ju Li ◽  
Brian E. Potter ◽  
...  
Keyword(s):  
Great Plains ◽  
Forest Fires ◽  
Fire Behavior ◽  
The United States ◽  
Fire Season ◽  
Turbulent Structures ◽  
Tall Grass ◽  
Tall Grass Prairie ◽  
Validation Experiment ◽  
Turbulence Data

Grass fires, although not as intense as forest fires, present a major threat to life and property during periods of drought in the Great Plains of the United States. Recently, major wildland grass fires in Texas burned nearly 1.6 million acres and destroyed over 730 homes and 1320 other buildings. The fires resulted in the death of 19 people, an estimated loss of 10,000 head of livestock, and more than $628 million in damage, making the 2005/06 fire season the worst on record for the state of Texas. As an aid to fire management, various models have been developed to describe fire behavior. However, these models strongly emphasize fuels and fail to adequately consider the role of convective dynamics within the atmosphere and its interaction with the fire due to the lack of observational data. To fill this gap, an intensive field measurement campaign called FireFlux was conducted during February 2006 near Houston, Texas. The campaign employed a variety of instrument platforms to collect turbulence data at multiple levels within and immediately downwind of a 155 acre tall-grass prairie burn unit. This paper presents some first-time observations of atmospheric turbulent structures/fluxes associated with intense grass fires and provides a basis to further our understanding of the dynamics of grass fires and their interactions with the atmosphere.

The FireFlux II experiment: a model-guided field experiment to improve understanding of fire–atmosphere interactions and fire spread

2019 ◽  
Vol 28 (4) ◽  
pp. 308 ◽  
Author(s):  
Craig B. Clements ◽  
Adam K. Kochanski ◽  
Daisuke Seto ◽  
Braniff Davis ◽  
Christopher Camacho ◽  
...  
Keyword(s):  
Fire Spread ◽  
Model Systems ◽  
Large Set ◽  
Tall Grass ◽  
Combustion Gases ◽  
Tall Grass Prairie ◽  
Fire Front ◽  
Air Chemistry ◽  
Atmosphere Model ◽  
Behaviour Data

The FireFlux II experiment was conducted in a tall grass prairie located in south-east Texas on 30 January 2013 under a regional burn ban and high fire danger conditions. The goal of the experiment was to better understand micrometeorological aspects of fire spread. The experimental design was guided by the use of a coupled fire–atmosphere model that predicted the fire spread in advance. Preliminary results show that after ignition, a surface pressure perturbation formed and strengthened as the fire front and plume developed, causing an increase in wind velocity at the fire front. The fire-induced winds advected hot combustion gases forward and downwind of the fire front that resulted in acceleration of air through the flame front. Overall, the experiment collected a large set of micrometeorological, air chemistry and fire behaviour data that may provide a comprehensive dataset for evaluating and testing coupled fire–atmosphere model systems.

scholarly journals Meteorological Conditions Conducive to the Rapid Spread of the Deadly Wildfire in Eastern Attica, Greece

2019 ◽  
Vol 100 (11) ◽  
pp. 2137-2145 ◽  
Author(s):  
K. Lagouvardos ◽  
V. Kotroni ◽  
T. M. Giannaros ◽  
S. Dafis
Keyword(s):  
Fire Behavior ◽  
Fire Spread ◽  
High Rate ◽  
Contributing Factors ◽  
Suburban Areas ◽  
Rate Of Spread ◽  
Rapid Spread ◽  
Westerly Flow ◽  
Downslope Flow ◽  
Extreme Fire

AbstractOn 23 July 2018, Attica, Greece, was impacted by a major wildfire that took place in a wildland–urban interface area and exhibited extreme fire behavior, characterized by a very high rate of spread. One-hundred civilian fatalities were registered, establishing this wildfire as the second-deadliest weather-related natural disaster in Greece, following the heat wave of July 1987. On the day of the deadly wildfire, a very strong westerly flow was blowing for more than 10 h over Attica. Wind gusts up to 30–34 m s−1 occurred over the mountainous areas of Attica, with 20–25 m s−1 in the city of Athens and surrounding suburban areas. This strong westerly flow interacted with the local topography and acted as downslope flow over the eastern part of Attica, with temperatures rising up to 39°C and relative humidity dropping to 19% prior to the onset of the wildfire. These weather elements are widely acknowledged as the major contributing factors to extreme fire behavior. WRF-SFIRE correctly predicted the spatiotemporal distribution of the fire spread and demonstrated its utility for fire spread warning purposes.

scholarly journals The Impact of Fuel Treatments on Wildfire Behavior in North American Boreal Fuels: A Simulation Study Using FIRETEC

Fire ◽  
2020 ◽  
Vol 3 (2) ◽  
pp. 18 ◽  
Author(s):  
Ginny Marshall ◽  
Dan Thompson ◽  
Kerry Anderson ◽  
Brian Simpson ◽  
Rodman Linn ◽  
...  
Keyword(s):  
Black Spruce ◽  
Treatment Options ◽  
Fire Behavior ◽  
Fire Spread ◽  
Natural Forests ◽  
Spread Rate ◽  
Multiple Components ◽  
In Fire ◽  
The Impact ◽  
Common Tree

Current methods of predicting fire spread in Canadian forests are suited to large wildfires that spread through natural forests. Recently, the use of mechanical and thinning treatments of forests in the wildland-urban interface of Canada has increased. To assist in community wildfire protection planning in forests not covered by existing operational fire spread models, we use FIRETEC to simulate fire spread in lowland black spruce fuel structures, the most common tree stand in Canada. The simulated treatments included the mechanical mulching of strips, and larger, irregularly shaped areas. In all cases, the removal of fuel by mulch strips broke up the fuels, but also caused wind speed increases, so little decrease in fire spread rate was modelled. For large irregular clearings, the fire spread slowly through the mulched wood chips, and large decreases in fire spread and intensity were simulated. Furthermore, some treatments in the black spruce forest were found to be effective in decreasing the distance and/or density of firebrands. The simulations conducted can be used alongside experimental fires and documented wildfires to examine the effectiveness of differing fuel treatment options to alter multiple components of fire behavior.

scholarly journals Improvement of fire danger rating and vegetation fire behaviour prediction on protected areas

2019 ◽  
Vol 16 ◽  
pp. 00040
Author(s):  
Aleksandra Volokitina ◽  
Dina Nazimova ◽  
Tatiana Sofronova ◽  
Mikhail Korets
Keyword(s):  
Protected Areas ◽  
Biological Diversity ◽  
Fire Behavior ◽  
Fire Spread ◽  
Fire Effects ◽  
Nature Reserves ◽  
Fire Danger ◽  
Behavior Prediction ◽  
Forest Fire Danger ◽  
Economic Use

Protected areas (PAs) are established to conserve biological diversity, to maintain nature complexes and objects in their natural condition. Strict nature reserves prevail in Russia by their total area. The whole nature complex is forever extracted from economic use in nature reserves. Here it is prohibited to pursue any activity which might disturb or damage the nature complexes. Even under the existing strict protection from anthropogenic ignition sources, vegetation fires do occur on their territory. Besides, lightnings − these natural ignition sources − are impossible to exclude. Since large destructive fires are impermissible in nature reserves, the later especially need vegetation fire behavior prediction for fire management. Fire behavior prediction includes fire spread rate, development (from surface fire into crown or ground one) and fire effects. All this is necessary for taking optimal decisions on how to control each occurring fire and how to suppress it. The Sukachev Institute of Forest SB RAS has developed a method to improve forest fire danger rating and a technique of vegetation fire behavior prediction using vegetation fuel maps (VF maps).

Preliminary Study of Fire Spread in Cities and Forests, Using PMMA Specimen as a Fuel in CFD Simulations

2009 ◽  
Author(s):  
Koyu Satoh ◽  
Naian Liu ◽  
Qiong Liu ◽  
K. T. Yang
Keyword(s):  
Laboratory Experiment ◽  
Forest Fires ◽  
Three Dimensional ◽  
Fire Spread ◽  
Weather Data ◽  
Strong Wind ◽  
Cfd Simulations ◽  
Worst Case ◽  
Fire Propagation ◽  
Fire Spreading

It is important to examine the behavior of forest fires and city fires to mitigate the property damages and victims by fires. There have been many previous studies on forest fires where the fire spreading patterns were investigated, utilizing artificial satellite pictures of forest fires, together with the use of corresponding weather data and GIS data. On the other hand, large area city fires are very scarce in the world, particularly in modern cities where high-rise concrete buildings are constructed with sufficient open spaces. Thus, the examples of city fires to be referred are few and detailed investigations of city fires are limited. However, there have still been existing old cities where traditional houses built with flammable material such as wood, maybe historically important, only separated with very small open spacing. Fires may freely spread in those cities, once a big earthquake happens there and then water supply for the fire brigade is damaged in the worst case along with the effect of strong wind. There are some fundamental differences between the forest fires and city fires, as the fuel may distribute either continuously or discretely. For instance, in forest fires, the dead fallen leaves, dry grasses and trees are distributed continuously on the ground, while the wooden houses in cities are discretely distributed with some separation of open spacing, such as roads and gardens. Therefore, the wooden houses neighboring the burning houses with some separation are heated by radiation and flames to elevate the temperatures, thus causing the ignition, and finally reaching a large city fire. The authors have studied the forest fire spread and are planning to start a laboratory experiment of city fire spreading. In the preliminary investigation, a numerical study is made to correlate with the laboratory experiment of city fire propagation, utilizing the three-dimensional CFD simulations. Based on the detailed experimental analysis, the authors are attempting to modify the three dimensional CFD code to predict the forest fires and city fires more precisely, taking into account the thermal heating and ignition processes. In this study, some fundamental information on the city fire propagation has been obtained, particularly to know the safe open spacing distances between the houses in the cities and also the wind speed.

Sign in / Sign up

Export Citation Format

Share Document