scholarly journals A Numerical Study of Wind Flow Over a Coal Storage Shelter

10.14311/1692 ◽  
2012 ◽  
Vol 52 (6) ◽  
Author(s):  
Tomáš Bodnár ◽  
Ludek Beneš ◽  
Luboš Pirkl ◽  
Eva Gulíková
Keyword(s):  
Flow Model ◽  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Wind Flow ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Structured Grid ◽  
Impermeable Wall ◽  
Volume Method

This paper presents some of the main numerical results obtained while simulating the wind flow over a shelter covering a coal storage. The aim of this numerical study was to evaluate the change in flow patterns caused by adding an impermeable wall to the originally open shelter. The numerical simulations of selected two-dimensional cases were performed using an open-source CFD code. The flow model is based on Reynolds-Averaged Navier-Stokes Equations solved using a finite-volume method on a structured grid. The turbulence is parametrized using the standard k − ε model. Two shelter wall configuration variants are evaluated, and are compared with the original open shelter setup.

scholarly journals Dynamics of Single Droplet Splashing on Liquid Film by Coupling FVM with VOF

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 841
Author(s):  
Yuzhen Jin ◽  
Huang Zhou ◽  
Linhang Zhu ◽  
Zeqing Li
Keyword(s):  
Liquid Film ◽  
Weber Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Single Droplet ◽  
Navier Stokes Equations ◽  
Volume Method ◽  
The Relationship

A three-dimensional numerical study of a single droplet splashing vertically on a liquid film is presented. The numerical method is based on the finite volume method (FVM) of Navier–Stokes equations coupled with the volume of fluid (VOF) method, and the adaptive local mesh refinement technology is adopted. It enables the liquid–gas interface to be tracked more accurately, and to be less computationally expensive. The relationship between the diameter of the free rim, the height of the crown with different numbers of collision Weber, and the thickness of the liquid film is explored. The results indicate that the crown height increases as the Weber number increases, and the diameter of the crown rim is inversely proportional to the collision Weber number. It can also be concluded that the dimensionless height of the crown decreases with the increase in the thickness of the dimensionless liquid film, which has little effect on the diameter of the crown rim during its growth.

Effect of the Separating Distance of Twin Buildings on the Generated Flow Structure

2010 ◽  
Vol 297-301 ◽  
pp. 924-929
Author(s):  
Inès Bhouri Baouab ◽  
Nejla Mahjoub Said ◽  
Hatem Mhiri ◽  
Georges Le Palec ◽  
Philippe Bournot
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Stress Model ◽  
Navier Stokes ◽  
Wind Flow ◽  
Turbulent Model ◽  
Navier Stokes Equations ◽  
Twin Buildings ◽  
Volume Method ◽  
Numerical Examination

The present work consists in a numerical examination of the dispersion of pollutants discharged from a bent chimney and crossing twin similar cubic obstacles placed in the lee side of the source. The resulting flow is assumed to be steady, three-dimensional and turbulent. Its modelling is based upon the resolution of the Navier Stokes equations by means of the finite volume method together with the RSM (Reynolds Stress Model) turbulent model. This examination aims essentially at detailing the wind flow perturbations, the recirculation and turbulence generated by the presence of the twin cubic obstacles placed tandem at different spacing distances (gaps): W = 4 h, W = 2 h and W = 1 h where W is the distance separating both buildings.

A Hybrid Unstructured/Spectral Method for the Resolution of Navier-Stokes Equations

2009 ◽  
Author(s):  
Roque Corral ◽  
Javier Crespo
Keyword(s):  
Finite Volume Method ◽  
Finite Volume ◽  
Stokes Equations ◽  
High Order ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
The Third ◽  
Third Dimension ◽  
Volume Method

A novel high-order finite volume method for the resolution of the Navier-Stokes equations is presented. The approach combines a third order finite volume method in an unstructured two-dimensional grid, with a spectral approximation in the third dimension. The method is suitable for the resolution of complex two-dimensional geometries that require the third dimension to capture three-dimensional non-linear unsteady effects, such as those for instance present in linear cascades with separated bubbles. Its main advantage is the reduction in the computational cost, for a given accuracy, with respect standard finite volume methods due to the inexpensive high-order discretization that may be obtained in the third direction using fast Fourier transforms. The method has been applied to the resolution of transitional bubbles in flat plates with adverse pressure gradients and realistic two-dimensional airfoils.

Numerical Study of Wave Slamming on an Oscillating Flap

2014 ◽  
Author(s):  
Yanji Wei ◽  
Alan Henry ◽  
Olivier Kimmoun ◽  
Frederic Dias
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Ocean Waves ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Numerical Studies ◽  
Wave Slamming ◽  
Volume Method

Bottom hinged Oscillating Wave Surge Converters (OWSCs) are efficient devices for extracting power from ocean waves. There is limited knowledge about wave slamming on such devices. This paper deals with numerical studies of wave slamming on an oscillating flap to investigate the mechanism of slamming events. In our model, the Navier–Stokes equations are discretized using the Finite Volume method with the Volume of Fluid (VOF) approach for interface capturing. Waves are generated by a flap-type wave maker in the numerical wave tank, and the dynamic mesh method is applied to model the motion of the oscillating flap. Basic mesh and time step refinement studies are performed. The flow characteristics in a slamming event are analysed based on numerical results. Various simulations with different flap densities, water depths and wave amplitudes are performed for a better understanding of the slamming.

Numerical Study of Wing Aerodynamics in Ground Proximity

2008 ◽  
Author(s):  
Alex E. Ockfen ◽  
Konstantin I. Matveev
Keyword(s):  
Iterative Process ◽  
Stokes Equations ◽  
Numerical Study ◽  
Ground Effect ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Design And Optimization ◽  
Volume Method ◽  
Experimental Design And Optimization

Experimental design and optimization of innovative ground-effect transportation means is an iterative process which requires a large amount of time and resources. To avoid the large experimental expense, numerical modeling can be used to investigate Wing-in-Ground (WIG) vehicle flight. In this paper, modeling technique is applied for a two dimensional NACA 4412 airfoil in viscous flow in and out of ground effect. The numerical method consists of a steady state, incompressible, finite volume method utilizing the Spalart-Allmaras turbulence model. Grid generation and solution of the Navier-Stokes equations are completed using FLUENT 6.3. The modeling procedures are first validated against published experimental data for unbounded flow around an airfoil. Wing section aerodynamic characteristics are then studied for varying ground heights and two separate boundary conditions: fixed ground and moving ground. Ground effect calculations are compared to several previous studies, and our results are found to correlate with published aerodynamic trends in ground effect, although all studies appear to predict different magnitudes of aerodynamic forces.

A Numerical Study of Vortex Shedding From a Square Cylinder With Ground Effect

1997 ◽  
Vol 119 (3) ◽  
pp. 512-518 ◽  
Author(s):  
Robert R. Hwang ◽  
Chia-Chi Yao
Keyword(s):  
Vortex Shedding ◽  
Stokes Equations ◽  
Numerical Study ◽  
Subsequent Development ◽  
Ground Effect ◽  
Navier Stokes ◽  
Square Cylinder ◽  
Navier Stokes Equations ◽  
Layer Flow ◽  
Volume Method

A numerical study has been conducted to investigate the behavior of the vortical wake created by a square cylinder placed in a laminar boundary-layer flow. The calculations are performed by solving the unsteady 2D Navier-Stokes equations with a finite-volume method. The Reynolds-number regime investigated is from 500 to 1500. Another parameter that is varied is the distance of the cylinder from the wall. The initial and subsequent development of the vortex shedding phenomenon are investigated. The presence of the wall is found to have strong effects on the properties of these vortices, as well as lift, drag, and Strouhal number.

Numerical study of ribbon-induced transition in Blasius flow

1987 ◽  
Vol 178 ◽  
pp. 345-365 ◽  
Author(s):  
Philippe R. Spalart ◽  
Kyung-Soo Yang
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Finite Amplitude ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Random Disturbances ◽  
Rapid Amplification ◽  
Dimensional Wave

The early three-dimensional stages of transition in the Blasius boundary layer are studied by numerical solution of the Navier-Stokes equations. A finite-amplitude two-dimensional wave and low-amplitude three-dimensional random disturbances are introduced. Rapid amplification of the three-dimensional components is observed and leads to transition. For intermediate amplitudes of the two-dimensional wave the breakdown is of subharmonic type, and the dominant spanwise wavenumber increases with the amplitude. For high amplitudes the energy of the fundamental mode is comparable to the energy of the subharmonic mode, but never dominates it; the breakdown is of mixed type. Visualizations, energy histories, and spectra are presented. The sensitivity of the results to various physical and numerical parameters is studied. The agreement with experimental and theoretical results is discussed.

Sign in / Sign up

Export Citation Format

Share Document