scholarly journals Nonlinear Guided Wave Tomography for Detection and Evaluation of Early-Life Material Degradation in Plates

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5498
Author(s):  
Chengwei Zhao ◽  
Sunia Tanweer ◽  
Jian Li ◽  
Min Lin ◽  
Xiang Zhang ◽  
...  
Keyword(s):  
Early Life ◽  
Guided Waves ◽  
Lamb Waves ◽  
Tone Burst ◽  
Guided Wave ◽  
Material Degradation ◽  
Third Order Elastic Constants ◽  
Metal Plates ◽  
Wave Tomography ◽  
Aluminum Plates

In this paper, the possibility of using nonlinear ultrasonic guided waves for early-life material degradation in metal plates is investigated through both computational modeling and study. The analysis of the second harmonics of Lamb waves in a free boundary aluminum plate, and the internal resonance conditions between the Lamb wave primary modes and the second harmonics are investigated. Subsequently, Murnaghan’s hyperelastic model is implemented in a finite element (FE) analysis to study the response of aluminum plates subjected to a 60 kHz Hanning-windowed tone burst. Different stages of material degradation are reflected as the changes in the third order elastic constants (TOECs) of the Murnaghan’s model. The reconstructed degradations match the actual ones well across various degrees of degradation. The effects of several relevant factors on the accuracy of reconstructions are also discussed.

Early Fatigue Damage Evaluation of Nonlinear Guided Wave Imaging in Hyperelastic Materials

2021 ◽  
Author(s):  
Chengwei Zhao ◽  
Sunia Tanweer ◽  
Jian Li ◽  
Min Lin ◽  
Xiang Zhang ◽  
...  
Keyword(s):  
Fatigue Damage ◽  
Guided Waves ◽  
Lamb Waves ◽  
Tone Burst ◽  
Guided Wave ◽  
Third Order ◽  
Hyperelastic Materials ◽  
Third Order Elastic Constants ◽  
Wave Imaging ◽  
Processing Platform

Abstract Nonlinear ultrasonic guided waves have superior sensitivity of the early fatigue damage. This paper investigates the analysis of the second harmonics of Lamb waves in a free boundary aluminum plate, and the internal resonance conditions between the Lamb wave primary modes and the second harmonics. The Murnaghan’s model is implemented in a finite element (FE) analysis to describe the hyperelastic constitutive relation for nonlinear acoustic modeling. The second harmonics of s0 mode are actuated by a 60kHz Hanning-windowed tone burst. A guided wave signal processing platform is developed for tomographic imaging. The different stages of fatigue are reflected by the changes of third-order elastic constants (TOECs) in Murnaghan’s model. The reconstructed damage locations match well with the actual ones cross different degrees and depths of fatigue.

Inspection of Concrete-Metal Rod Interface Using Guided Waves

2000 ◽  
Author(s):  
Won-Bae Na ◽  
Tribikram Kundu ◽  
Mohammad R. Ehsani
Keyword(s):  
Lamb Wave ◽  
Guided Waves ◽  
Lamb Waves ◽  
Guided Wave ◽  
Ultrasonic Transducers ◽  
Interface Debonding ◽  
Long Distance ◽  
Steel Rebar ◽  
Steel Bars ◽  
Steel Rebars

Abstract The feasibility of detecting interface degradation and separation of steel rebars in concrete beams using Lamb waves is investigated in this paper. It is shown that Lamb waves can easily detect these defects. A special coupler between the steel rebar and ultrasonic transducers has been used to launch non-axisymmetric guided waves in the steel rebar. This investigation shows that the Lamb wave inspection technique is an efficient and effective tool for health monitoring of reinforced concrete structures because the Lamb wave can propagate a long distance along the reinforcing steel bars embedded in concrete as the guided wave and is sensitive to the interface debonding between the steel rebar and concrete.

scholarly journals Warped Wigner-Hough Transform for Defect Reflection Enhancement in Ultrasonic Guided Wave Monitoring

2012 ◽  
Vol 2012 ◽  
pp. 1-15 ◽  
Author(s):  
Luca De Marchi ◽  
Emanuele Baravelli ◽  
Giampaolo Cera ◽  
Nicolò Speciale ◽  
Alessandro Marzani
Keyword(s):  
Hough Transform ◽  
Guided Waves ◽  
Lamb Waves ◽  
Guided Wave ◽  
Nonlinear Signal Processing ◽  
Localization Accuracy ◽  
Time Frequency ◽  
Ultrasonic Guided Wave ◽  
Inspection Systems ◽  
Nonlinear Signal

To improve the defect detectability of Lamb wave inspection systems, the application of nonlinear signal processing was investigated. The approach is based on a Warped Frequency Transform (WFT) to compensate the dispersive behavior of ultrasonic guided waves, followed by a Wigner-Ville time-frequency analysis and the Hough Transform to further improve localization accuracy. As a result, an automatic detection procedure to locate defect-induced reflections was demonstrated and successfully tested by analyzing numerically simulated Lamb waves propagating in an aluminum plate. The proposed method is suitable for defect detection and can be easily implemented for real-world structural health monitoring applications.

Noncontact/Remote Material Characterization Using Ultrasonic Guided Wave Methods

2020 ◽  
Author(s):  
Zhaoyun Ma ◽  
Lingyu Yu
Keyword(s):  
Guided Waves ◽  
Broad Band ◽  
Laser Doppler Vibrometer ◽  
Pulsed Laser ◽  
Guided Wave ◽  
Target Plate ◽  
Ultrasonic Guided Wave ◽  
Time Space ◽  
Aluminum Plates ◽  
Wave Methods

Abstract Noncontact and remote NDE systems and methods are highly desired in a broad range of engineering applications such as material property characterization. This paper aims to develop such a noncontact/remote NDE system based on laser ultrasonic guided waves and establish its fundamental capability for material thickness evaluation. The noncontact system employs pulsed laser (PL) for guided wave actuation and scanning laser Doppler vibrometer (SLDV) for guided wave wavefield sensing. A cylindrical planoconvex lens is adopted to focus the pulsed laser beam to a line source in order to excite broad band signals in the target plate. Aluminum plates with different thicknesses are evaluated through SLDV line scans and 2D time-space wavefields are acquired. Frequency-wavenumber (f-k) spectra are obtained through 2D Fourier transform, and the A0 dispersion curve for each plate is extracted. Through Comparing the extracted A0 curve with the theoretical A0 dispersion curves, the thicknesses of the tested plates are identified. Reflective tape effect on the plates are also studied: the reflective tape attached for SLDV enhancement affects the guided waves in the target plate significantly when the plate is relatively thin.

scholarly journals Attenuation of a Slow Subsonic A0 Mode Ultrasonic Guided Wave in Thin Plastic Films

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1648 ◽  
Author(s):  
Rymantas Kažys ◽  
Reimondas Šliteris ◽  
Liudas Mažeika ◽  
Olgirdas Tumšys ◽  
Egidijus Žukauskas
Keyword(s):  
Guided Waves ◽  
High Efficiency ◽  
Lamb Waves ◽  
Ultrasonic Transducer ◽  
Plane Waves ◽  
Ultrasound Velocity ◽  
Guided Wave ◽  
Low Frequencies ◽  
Plastic Films ◽  
Thin Plastic

The ultrasonic testing technique using Lamb waves is widely used for the non-destructive testing and evaluation of various structures. For air-coupled excitation and the reception of A0 mode Lamb waves, leaky guided waves are usually exploited. However, at low frequencies (<100 kHz), the velocity of this mode in plastic and composite materials can become slower than the ultrasound velocity in air, and its propagation in films is accompanied only by an evanescent wave in air. To date, the information about the attenuation of the slow A0 mode is very contradictory. Therefore, the objective of this investigation was the measurement of the attenuation of the slow A0 mode in thin plastic films. The measurement of the attenuation of normal displacements of the film caused by a propagating slow A0 mode is discussed. The normal displacements of the film at different distances from the source were measured by a laser interferometer. In order to reduce diffraction errors, the measurement method based on the excitation of cylindrical but not plane waves was proposed. The slow A0 mode was excited in the polyvinylchloride film by a dry contact type ultrasonic transducer made of high-efficiency PMN-32%PT strip-like piezoelectric crystal. It was found that that the attenuation of the slow A0 mode in PVC film at the frequency of 44 kHz is 2 dB/cm. The obtained results can be useful for the development of quality control methods for plastic films.

scholarly journals Core–skin debonding detection in honeycomb sandwich structures through guided wave wavefield analysis

2018 ◽  
Vol 30 (9) ◽  
pp. 1306-1317 ◽  
Author(s):  
Lingyu Yu ◽  
Zhenhua Tian ◽  
Xiaopeng Li ◽  
Rui Zhu ◽  
Guoliang Huang
Keyword(s):  
Guided Waves ◽  
Sandwich Structures ◽  
Lamb Waves ◽  
Laser Doppler Vibrometer ◽  
Low Frequency ◽  
Guided Wave ◽  
Honeycomb Sandwich ◽  
Debonding Detection ◽  
The Waves ◽  
Detection And Quantification

Ultrasonic guided waves have proven to be an effective and efficient method for damage detection and quantification in various plate-like structures. In honeycomb sandwich structures, wave propagation and interaction with typical defects such as hidden debonding damage are complicated; hence, the detection of defects using guided waves remains a challenging problem. The work presented in this article investigates the interaction of low-frequency guided waves with core–skin debonding damage in aluminum core honeycomb sandwich structures using finite element simulations. Due to debonding damage, the waves propagating in the debonded skin panel change to fundamental antisymmetric Lamb waves with different wavenumber values. Exploiting this mechanism, experimental inspection using a non-contact laser Doppler vibrometer was performed to acquire wavefield data from pristine and debonded structures. The data were then processed and analyzed with two wavefield data–based imaging approaches, the filter reconstruction imaging and the spatial wavenumber imaging. Both approaches can clearly indicate the presence, location, and size of the debonding in the structures, thus proving to be effective methods for debonding detection and quantification for honeycomb sandwich structures.

NUMERICAL MODELING OF WALL THINNING DEFECTS CHARACTERIZATION: APPLICATIONS IN LAMB WAVE GENERATION AND INTERACTION

2008 ◽  
Vol 22 (11) ◽  
pp. 935-940
Author(s):  
HYUNJO JEONG ◽  
SEUNG-SEOK LEE ◽  
YOUNG-GIL KIM
Keyword(s):  
Guided Waves ◽  
Lamb Waves ◽  
Mode Conversion ◽  
Wave Interaction ◽  
Guided Wave ◽  
Destructive Interference ◽  
Wall Thinning ◽  
Mode Dispersion ◽  
Periodic Ring ◽  
Axisymmetric Scattering

The generation of axisymmetric Lamb waves and interaction with wall thinning (corrosion) defects in hollow cylinders are simulated using the finite element method. Guided wave interaction with defects in cylinders is challenged by the multi-mode dispersion and the mode conversion. In this paper, two longitudinal, axisymmetric modes are generated using the concept of a time-delay periodic ring arrays (TDPRA), which makes use of the constructive/destructive interference concept to achieve the unidirectional emission and reception of guided waves. The axisymmetric scattering by the wall thinning extending in full circumference of a cylinder is studied with a two-dimensional FE simulation. The effect of wall thinning depth, axial extension, and the edge shape on the reflections of guided waves is discussed.

scholarly journals An Investigation on a Quantitative Tomographic SHM Technique for a Containment Liner Plate in a Nuclear Power Plant with Guided Wave Mode Selection

Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2819 ◽  
Author(s):  
Yonghee Lee ◽  
Younho Cho
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Elastic Wave ◽  
Nuclear Power ◽  
Guided Waves ◽  
Mode Selection ◽  
Wave Mode ◽  
Guided Wave ◽  
Element Analysis ◽  
Wave Tomography

The containment liner plate (CLP) in a nuclear power plant is the most critical part of the structure of a power plant, as it prevents the radioactive contamination of the surrounding area. This paper presents feasibility of structural health monitoring (SHM) and an elastic wave tomography method based on ultrasonic guided waves (GW), for evaluating the integrity of CLP. It aims to check the integrity for a dynamic response to a damaged isotropic structure. The proposed SHM technique relies on sensors and, therefore, it can be placed on the structure permanently and can monitor either passively or actively. For applying this method, a suitable guided wave mode tuning is required to verify wave propagation. A finite element analysis (FEA) is performed to figure out the suitable GW mode for a CLP by considering geometric and material condition. Furthermore, elastic wave tomography technique is modified to evaluate the CLP condition and its visualization. A modified reconstruction algorithm for the probabilistic inspection of damage tomography algorithm is used to quantify corrosion defects in the CLP. The location and shape of the wall-thinning defects are successfully obtained by using elastic GW based SHM. Making full use of verified GW mode to Omni-directional transducer, it can be expected to improve utilization of the SHM based evaluation technique for CLP.

scholarly journals Improving accuracy through density correction in guided wave tomography

2016 ◽  
Vol 472 (2186) ◽  
pp. 20150832 ◽  
Author(s):  
P. Huthwaite
Keyword(s):  
Guided Waves ◽  
Low Frequency ◽  
Region Of Interest ◽  
Density Variation ◽  
Pressure Vessels ◽  
Guided Wave ◽  
Wave Tomography ◽  
Wall Loss ◽  
Improving Accuracy ◽  
The Waves

The accurate quantification of wall loss caused by corrosion is critical to the reliable life estimation of pipes and pressure vessels. Traditional thickness gauging by scanning a probe is slow and requires access to all points on the surface; this is impractical in many cases as corrosion often occurs where access is restricted, such as beneath supports where water collects. Guided wave tomography presents a solution to this; by transmitting guided waves through the region of interest and exploiting their dispersive nature, it is possible to build up a map of thickness. While the best results have been seen when using the fundamental modes A0 and S0 at low frequency, the complex scattering of the waves causes errors within the reconstruction. It is demonstrated that these lead to an underestimate in wall loss for A0 but an overestimate for S0. Further analysis showed that this error was related to density variation, which was proportional to thickness. It was demonstrated how this could be corrected for in the reconstructions, in many cases resulting in the near-elimination of the error across a range of defects, and greatly improving the accuracy of life estimates from guided wave tomography.

scholarly journals Comparison of Ultrasonic Non-Contact Air-Coupled Techniques for Characterization of Impact-Type Defects in Pultruded GFRP Composites

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1058
Author(s):  
Aadhik Asokkumar ◽  
Elena Jasiūnienė ◽  
Renaldas Raišutis ◽  
Rymantas Jonas Kažys
Keyword(s):  
Guided Waves ◽  
Lamb Waves ◽  
Tomographic Reconstruction ◽  
Guided Wave ◽  
Reconstruction Technique ◽  
Bulk Wave ◽  
Glass Fiber Reinforced Plastic ◽  
Ultrasonic Guided Wave ◽  
Single Side ◽  
Numerical Finite Element

This article compares different air-coupled ultrasonic testing methods to characterize impact-type defects in a pultruded quasi-isotropic glass fiber-reinforced plastic (GFRP) composite plate. Using the air-coupled transducers, comparisons among three methods were performed, namely, bulk-wave through transmission, single-side access using guided waves, and ultrasonic-guided wave tomography. The air coupled through transmission technique can determine the size and shape of impact-type defects with a higher resolution, but with the consequence of time consumption and, more importantly, the necessity of access to both sides of the sample. The guided wave technique on the other hand, allows a single-side inspection and is relatively fast. It can be used to determine the size of the defect using ultrasonic B-scan, but the exact shape of the defect will be compromised. Thus, in this article, to determine the shape of the defect, application of the parallel beam tomographic reconstruction technique using guided Lamb waves is demonstrated. Furthermore, a numerical finite element simulation was performed to study the effects of guided wave propagation in the composite sample and interaction with the internal defect. Lastly, the results from the experiments of different techniques were compared according to possibilities of defect sizing and determination of its shape.

Sign in / Sign up

Export Citation Format

Share Document