scholarly journals The influence of wood processing waste on the technical and energy characteristics of the Maikuben coal-based mixed fuels

2021 ◽  
Vol 2057 (1) ◽  
pp. 012128
Author(s):  
G V Kuznetsov ◽  
I V Cherednik ◽  
A A Galaktionova ◽  
S A Yankovsky
Keyword(s):  
Experimental Studies ◽  
Calorific Value ◽  
Wood Biomass ◽  
Processing Waste ◽  
Energy Characteristics ◽  
Mixed Fuel ◽  
Pine Sawdust ◽  
Wood Processing ◽  
Moderate Reduction ◽  
The Republic

Abstract The manuscript presents the results of experimental studies of the energy and technical characteristics of mixed fuels based on lignite from the Maikuben basin of the Republic of Kazakhstan and wood processing waste, pine sawdust from the Tomsk LPC. The addition of wood biomass to coal is found to result in a significant reduction in the ash content of the mixed fuel (by 73.1 %) with a wood fraction equal to 50 % and a moderate reduction in calorific value (by 8.2 %) with the same concentration of biomass in the mixed fuel.

scholarly journals ANALYSIS OF THE ENERGY CHARACTERISTICS OF COMPONENTS OF MUNICIPAL SOLID WASTE OF A CITY WITH A POPULATION OF 300 000 PEOPLE

2018 ◽  
Vol 40 (2) ◽  
pp. 33-40
Author(s):  
O.I. Sigal ◽  
L.I. Vorobiov ◽  
N.Y. Pavliuk ◽  
R.V. Serhiienko
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Experimental Studies ◽  
Calorific Value ◽  
Ash Content ◽  
Domestic Waste ◽  
Solid Domestic Waste ◽  
Energy Characteristics ◽  
Integrated Waste Management

The results of experimental studies of humidity, ash content, calorific value for сomponents of municipal solid waste in Cherkassy city are presented. The results of the research are used to develop an integrated waste management and recycling system in the Cherkassy city.  The waste management strategy has been adopted in Ukraine. It determines the main directions of reforming the system of sanitary cleaning of cities in order to minimize environmental pollution in accordance with EU standards. In the process of preparation of the regional implementation plan for the Strategy in Cherkassy, a study of the morphology, energy and environmental characteristics of the components of solid domestic waste (SDW) was made. This article presents the results of experimental studies of humidity, calorific value and ash content for 8 components of waste: paper, cardboard, composite materials, textiles, hygiene products, plastic, other combustible materials, wood shavings are presented. Humidity is also determined in organic residues and in fine fractions. The investigations were carried out at the experimental stand of the Institute of Technical Thermophysics of the National Academy of Sciences of Ukraine. Due to the absence in Ukraine of standards for the study of energy characteristics of solid waste, the measurements were carried out in accordance with standards for solid organic fuels, which slightly differ from the EU methods for the study of solid waste. In order to develop regional integrated waste management plans within the framework of the strategy implementation, based on the qualitative analysis of MSW components, it is necessary to develop standards for determining the energy characteristics of SDW in line with European normative documents. The study of the energy characteristics of solid waste showed a significant heterogeneity in the components of solid waste, which significantly complicated the determination of characteristics and led to a considerable scatter of results and an increase in measurement uncertainty. This happened due to low weight and the need for thorough homogenization of the sample, which was experimentally investigated in accordance with the method of preparation of an analytical sample. The article analyzes need for adaptation of the European methods of detailed morphology of solid domestic waste in Ukraine, which is necessary for separate waste collection. The results of the research are used to develop an integrated waste management and recycling system in the city of Cherkassy.

Energetic properties of peat saturated with petroleum products

2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva
Keyword(s):  
Crude Oil ◽  
Diesel Fuel ◽  
Energy Use ◽  
Experimental Studies ◽  
Calorific Value ◽  
Petroleum Products ◽  
Ash Content ◽  
Motor Oil ◽  
Initial Sample

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.

scholarly journals Using four pelletizing machines with flat die and different capacities for obtaining the best pellets from corn cobs waste

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 7058-7073
Author(s):  
Aurel Lunguleasa ◽  
Cosmin Spirchez ◽  
Sorin Radulescu
Keyword(s):  
Wood Species ◽  
Calorific Value ◽  
Positive Influence ◽  
Corn Cob ◽  
Energy Characteristics ◽  
Human Food ◽  
Corn Cobs

Making pellets from corn cobs, the goal of this work, was motivated by the abundance of vegetable biomass. Corn is used in both animal and human food. Four pelletizing presses with flat die and different capacities were considered. The influence of the capacity of the pellet mills on the density of the obtained pellets was established by increasing the capacities of the pellet mills to increase the density of the pellets. The waste of crushed corn cobs was used for pelletizing. The energy characteristics of the pellets from corn cobs were determined, with a high calorific value of 20.0 MJ·kg-1 and a calorific density of 19.8 MJ·m-3; these values were much higher than the wood species used currently in combustion. The black and calcined ash contents of 24.7% and 2.3%, respectively, were also obtained. Based on the main properties of experimental pellets, corn cob waste can be regarded as suitable for transformation into pellets with good characteristics. The positive influence of capacity press increase on density of pellets was also highlighted.

scholarly journals Evaluation of ash related problems during sewage sludge combustion

2019 ◽  
pp. 184-191
Author(s):  
Agnes Serbanescu ◽  
Mona Barbu ◽  
Ionut Cristea ◽  
Gina Catrina ◽  
Georgiana Cernica ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Combustion Process ◽  
Experimental Studies ◽  
Calorific Value ◽  
Waste To Energy ◽  
Mineral Matter ◽  
X Ray ◽  
Analytical Technique ◽  
Acid Ratio ◽  
Sludge Ash

A good function of waste-to-energy installation requires knowledge of the combustion characteristics of the fuel and fusion characteristics of the ash produced in the combustion process. Sewage sludge could be considered as renewable fuel due the high quantity of organics of sufficiently high calorific value. The combustion of sewage sludge can cause operating problems due to high ash content containing mineral compounds. This paper presents the oxide composition of three kinds of sewage sludge ashes and the influence on the slagging and fouling process in combustion. For comparation, two coal samples were selected, a low and a high rank coal. The mineral matter were investigated by the X-ray fluorescence analytical technique using the Rigaku CG X-ray Spectrofluorimeter. The evaluation of slagging and fouling process was performed on the basis of some indices: the basic oxides, the base-to-acid ratio, the slagging index and the fouling index. The conclusion based on experimental studies is that depending on mineral content the sewage sludge ash can cause high to moderate slagging and fouling hazard.

scholarly journals The Lobe-Type Agitator Parameters of the Seed-Metering Unit in the Seed-Fertilizer Drill Justification

2018 ◽  
Vol 12 (5) ◽  
pp. 20-24
Author(s):  
D. Z. Yeskhozhin ◽  
S. O. Nukeshev ◽  
G. I. Lichman ◽  
Ye. S. Akhmetov ◽  
K. D. Yeskhozhin
Keyword(s):  
Experimental Studies ◽  
Soil Productivity ◽  
Theoretical Studies ◽  
Total Resistance ◽  
Applied Mechanics ◽  
Main Indicator ◽  
Farm Produce ◽  
The Republic ◽  
Seed Medium ◽  
Livestock Products

Livestock products are the most important component of the actual total volume of farm produce. A reliable fodder base is required to increase their quantity and quality. The most part of the natural forage lands of the Republic of Kazakhstan is located in areas with insufficient water availability and low soil productivity. When they are used intensively, they are thinned and degraded. Their restoration and improving is possible if effective technologies and technical means are effected. However, the existing methods for improving and restoring forage lands and the technical means for their implementation are not adapted to the natural­climatic and agrobiological features of the zone of Central and Northern Kazakhstan, which feature insufficient moisture supply and low productivity.The main indicator of the effectiveness of the use of fodder crop seeds is their uniform distribution in the soil. However, most of them, due to their poor flowability, form dome structures of different sizes in front of seeding openings, which hinder the seeding process. To increase the flowability of such seeds, they are mixed with sand, sawdust, fertilizer and other materials. However, during the operation of seeders, the mixture is stratified according to its specific gravity. (The research purpose) is to develop a lobe­type agitator, which prevents the formation of a dome over seed holes. (Materials and methods) Theoretical studies have been carried out using the methods of classical and applied mechanics, as well as special sections of higher mathematics. (Results and discussion) The authors have experimentally confirmed the main parameters of the agitator and its resistance to movement in a seed medium. Experimental studies have been carried out on the basis of GOST 31345­2007. The studies have confirmed that a four­lobe agitator with an external radius of 0.06 m and an inclination angle to the plane of rotation 20°, mounted on the fertilizer drill SZS­2.0, has shown a total resistance of 3,042 kg with a design value of 2.925 kg. (Conclusions) The obtained results can be offered to the designers and developers of machines of the considered type when calculating and designing their working elements.

scholarly journals Basic chemical composition of Pinus spp. sawdust from five regions of Mexico, for bioenergetic purposes

BioResources ◽  
2020 ◽  
Vol 16 (1) ◽  
pp. 816-824
Author(s):  
Jonathan Sergio Chávez-Rosales ◽  
Luis Fernando Pintor-Ibarra ◽  
Nicolás González-Ortega ◽  
Rocio Orihuela-Equihua ◽  
Faustino Ruiz-Aquino ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Calorific Value ◽  
Ash Content ◽  
Nuevo Leon ◽  
Pine Sawdust ◽  
Solid Biofuels ◽  
Nuevo León ◽  
Forest Industries ◽  
Total Extractives ◽  
Pinus Spp

The basic chemical composition and calorific value of 19 samples of pine sawdust from different forest industries located in five states of the Mexican Republic (Chihuahua, Michoacán, Durango, Oaxaca, and Nuevo León) were determined. The results obtained ranged as follows: total extractives (6.1% to 23.4%), holocellulose (60.1% to 70.4%), lignin (20.5% to 25.8%), ash (0.27% to 0.95%), pH (4.1 to 5.3), and calorific value (20.1 MJ/kg to 21.0 MJ/kg). Except for the ash content, significant statistical differences were found according to the origin of the pine sawdust samples. Based on the results obtained, the sawdust biomass has the potential to obtain densified solid biofuels.

Diesel engine performance at the intake of the hydrogen&air mixture

2021 ◽  
pp. 119-126
Author(s):  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Fuel Efficiency ◽  
Experimental Studies ◽  
Motor Fuel ◽  
Engine Performance ◽  
Calorific Value ◽  
Hydrocarbon Emissions ◽  
The Difference

The prospects of using hydrogen as a motor fuel are noted. The problems that arise when converting a diesel engine to run on hydrogen are considered. The features of the organization of the working process of enginesrunning on hydrogen are analyzed. A method of supplying a hydrogenair mixture to a diesel engine is investigated. To supply hydrogen to the engine cylinders, it is proposed to use the Leader4M installation developed by TechnoHill Club LLC (Moscow). Experimental studies of a stationary diesel engine of the D245.12 S type with the supply of hydrogen at the inlet obtained at this installation are carried out. At the maximum power mode, the supply of hydrogen from this installation to the inlet of the diesel engine under study was 0.9 % by weight (taking into account the difference in the calorific value of oil diesel fuel and hydrogen). Such a supply of hydrogen in the specified mode made it possible to increase the fuel efficiency of the diesel engine and reduce the smoke content of exhaust gases, carbon monoxide and unburned hydrocarbon emissions. Keywords internal combustion engines; diesel engine; diesel fuel; hydrogen; hydrogenair mixture; fuel efficiency; exhaust gas toxicity indicators

scholarly journals Quality evaluation of briquettes made from wood waste

2012 ◽  
Vol 58 (No. 1) ◽  
pp. 30-35 ◽  
Author(s):  
M. Brožek ◽  
A. Nováková ◽  
M. Kolářová
Keyword(s):  
Quality Evaluation ◽  
Evaluation Criteria ◽  
Calorific Value ◽  
Wood Dust ◽  
Gross Calorific Value ◽  
Pine Sawdust ◽  
Fine Grained ◽  
Technology Products ◽  
Mechanical Durability ◽  
Total Moisture Content

At logging and at the subsequent wood and wood semi-products treatment the fine grained loose waste arises, e.g. wood dust, saw dust, shavings, chips, bark etc. One of possibilities of its meaningful utilization is the briquetting technology, products of which are briquettes determined for energetic utilization (combustion). In the paper the experimental results are published. The briquettes quality evaluation was their aim. For the briquetting tests bark (pine), shavings (about 90% spruce + 10% pine), sawdust (spruce), birch chips and poplar chips were used. The basic physical-mechanical properties were the evaluation criteria. Following properties were determined: gross calorific value, total moisture content, density, rupture force, length, diameter, density and mechanical durability.

scholarly journals Influence of different temperature regimes at torrefaction of chicken litter on yield and properties of products

2019 ◽  
Vol 114 ◽  
pp. 06007
Author(s):  
Olga Larina ◽  
Yana Pudova
Keyword(s):  
Chemical Composition ◽  
Thermogravimetric Analysis ◽  
Liquid Fraction ◽  
Experimental Studies ◽  
Calorific Value ◽  
Solid Residue ◽  
Optimum Temperature ◽  
Volume Yield ◽  
Temperature Regimes ◽  
Chicken Litter

The purpose of the research is study the influence of the torrefaction process on the fuel properties of the chicken litter. Experimental studies on lab-scale system at five temperature regimes of torrefaction (220, 240, 260, 280, and 300 °C) with a holding time determined using thermogravimetric analysis were conducted. The products of the torrefaction are solid residue, non-condensable gases, and tar. For the feedstock and torrefied material the elemental composition, the lower calorific value, hygroscopicity limit and bulk density are determined. For liquid fraction the analysis of the chemical composition is carried out. The properties of non-condensable gases as chemical composition and calorific value - are investigated. Mass yields of the solid residue and tar, and specific volume yield of the non-condensable gases are presented. The conclusion about the optimum temperature regime for torrefaction of chicken litter based on the results of experimental studies is made.

Sign in / Sign up

Export Citation Format

Share Document